Installation and Operation Manual 2301D Digital Load Sharing and Speed Control for Engines Ordinary Locations— 8273-101 Hazardous Locations— 8273-135, -1000 Manual 26065 (Revision H) DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. • DANGER— Indicates a hazardous situation which, if not avoided, will result in death or serious injury. • WARNING— Indicates a hazardous situation which, if not avoided, could result in death or serious injury. • CAUTION— Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE— Indicates a hazard that could result in property damage only (including damage to the control). • IMPORTANT— Designates an operating tip or maintenance suggestion. The engine, turbine, or other type of prime mover should be equipped with an overspeed shutdown device to protect against runaway or damage to the prime mover with possible personal injury, loss of life, or property damage. The overspeed shutdown device must be totally independent of the prime mover control system. An overtemperature or overpressure shutdown device may also be needed for safety, as appropriate. Read this entire manual and all other publications pertaining to the work to be performed before installing, operating, or servicing this equipment. Practice all plant and safety instructions and precautions. Failure to follow instructions can cause personal injury and/or property damage. This publication may have been revised or updated since this copy was produced. To verify that you have the latest revision, be sure to check the W...