Configu ration Management Process Description GENERAL DISTRIBUTION June 2005 Process Description AP-929 (Revision 1) CONFIGURATION MANAGEMENT PROCESS DESCRIPTION June 2005 AP-929 (Revision 1) INSTITUTE OF NUCLEAR POWER OPERATIONS GENERAL DISTRIBUTION: Copyright © 2005 by the Institute of Nuclear Power Operations. Not for sale nor for commercial use. All other rights reserved. NOTICE: This information was prepared in connection with work sponsored by the Institute of Nuclear Power Operations (INPO). Neither INPO, INPO members, INPO participants, nor any person acting on the behalf of them (a) makes any warranty or representation, expressed or implied, with respect to the accuracy, completeness, or usefulness of the information contained in this document, or that the use of any information, apparatus, method, or process disclosed in this document may not infringe on privately owned rights, or (b) assumes any liabilities with respect to the use of, or for damages resulting from the use of any information, apparatus, method, or process disclosed in this document. INPO AP-929 (Revision 1) FOREW ORD This document describes a configuration management (CM) process to assist member utilities in maintaining high levels of safe and reliable plant operation. The objective of configuration management is to maintain consistency among the design requirements, the physical plant configuration, and the facility configuration information (FCI). The objectives and program management elements for configuration management of nuclear facilities are contained in ANSI/NIRMA CM 1.0-2000, Configu ration Management of Nu clear Facilities. The configuration management process is one of an integrated set of processes for the operation and suppo...